Product Description: This product is a high-performance alternative to the Rohm and Haas antiseptic for latex paint, all kinds of water-based paints, polymer emulsion. It can also inhibit the breeding of bacteria and fungi in paints, inks and other water-based products stored procedure. A large number of experiments and practical application shows: The product of acrylic acid, polyvinyl acetate, polystyrene, butyl and other copolymers have excellent anti-corrosion effect, but with these products organic and inorganic constituents have excellent compatibility with sex. Product Features and Benefits: 1, broad-spectrum activity: higher activity range, can effectively inhibit bacteria (including gram-positive, gram-negative bacteria) molds, yeasts; 2, excellent physical and chemical compatibility; 3, easy to use, low cost; 4, does not contain formaldehyde or formaldehyde emissions; 5, low-toxic at the recommended dosage. Product composition and characteristics: total active ingredient: 1.5% Color: Up to 4VCS Odor: mild fragrance pH (product): 2-4 Viscosity: 3cps gravity: 1.02 solution (water): free miscible Solubility (organic solvent ): soluble in most organic solvents Product use: supply in the form of a liquid, easy to mix. Experiments show that the preservative effect of this product will not join because of different points affected. It can be used to join directly in the ground or add slow process. To ensure uniform dispersion After the addition, the emulsion and water-based paint must be stirred well. Depending on the circumstances of different products, preservatives dosage should be adjusted accordingly, the general amount of 0.05-0.3% per 1000 kg of product was added to 0.5 to 3 kg. Packing: 25kg / barrel,